If you're an avid upcycler, it's easy to see the potential in everything you set your eyes on. When Leslie Jarrett spotted this cool antique piece of furniture online, suddenly, refinishing a buffet was next on her list of DIYs, and a very exciting prospect at that.
You may have guessed, Jarrett is an avid DIYer.
Based in Denver, CO, she has a furniture flipping business @wonderfullymadebyleslie (opens in new tab) and picked up this solid wood antique buffet for just $60 on Facebook Marketplace (opens in new tab) before setting out to refinish it, lightening the wood to give it an updated farmhouse look.
Finding your inspiration
It always helps to have a vision in mind when you start even looking for furniture to flip. 'I knew I wanted a lighter wood piece but I wasn’t sure if that was possible until I removed the old stain and topcoat. I tried using bleach for the first time to cut out some of the yellow in the wood and it worked like a charm!' Making this an ideal piece for a farmhouse kitchen or dining space.
How to refinish an antique wood buffet
Before you consider a piece to upcycle, you do need to asses that it's in good enough condition to work on. Jarrett highlights that 'The piece had a lot of cosmetic issues but it was in solid condition.'
Tools and supplies:
1.Orbital Sander: This DIY uses a BLACK+DECKER Random Orbit Sander, 5-Inch (BDERO100) (opens in new tab)
2. Sandpaper: Orbital rounds are available on Amazon (opens in new tab)
3. Grippers: This contour and angling pack is ideal (opens in new tab)
5. Topcoat: Jarrett used Varathan Clear Matte Water-Based Interior Polyurethane from The Home Depot (opens in new tab)
6. Carbide Scraper (opens in new tab)
7. Bar Keepers Friend (opens in new tab)and an old toothbrush!
8. Regular household bleach (opens in new tab)
Note that refinishing furniture is an achievable project even for newbies to the DIY world but, it will take a little more time and patience, so block out a weekend and don't give up!
'Refinishing this massive antique buffet has been one of my hardest projects thus far and the hardware was in serious need of a good cleaning…but you know what? I always love my restored pieces a little more because the amount of work that goes into them.'
Here's how to tackle this upcycle.
1. Clean and strip the piece
'First clean your piece with Krud Kutter (opens in new tab) then apply a paint stripper.' Jarrett said she also cleaned up the hardware using trusty Bar Keepers Friend (opens in new tab) along with the toothbrush.
There are good eco-friendly products you can use when stripping varnish from wood furniture like Back to Nature's Hi-Speed-Ready-Strip which you can find on The Home Depot (opens in new tab) usually for less than $10.
It is best to work in sections, and Jarrett used an old toothbrush on the trim pieces.
2. Sand thoroughly
Sanding furniture is key as it will give a good finish and better grip for repainting.
'After scraping the stripper off (per directions on the bottle), sand the entire piece starting with 80 then 150 then 220 grit sandpaper.'
For this, Jarrett bought Orbital rounds on Amazon (opens in new tab) but depending on your piece, it's worth investing in an assortment of sandpaper (opens in new tab), and being thorough will always give the best results so don't skip this step. 'Sanding grippers (opens in new tab) helped get in all the detail spots.'
3. Treat and refinish
Next, Jarrett actually applied bleach (opens in new tab) to the entire piece, allowing it to dry completely.
Make sure you wear gloves, protective eyewear and a mask. And while bleach is useful to lighten wood, when it comes to cleaning products, we like to keep more eco-friendly cleaning products to hand!
Jarrett then chose a paint wash over a stain, 'I applied a paint wash instead of a stain because I was wanting to blend the grain stripes on the piece. A stain would have made them stand out more. I used a 4:1 ratio of water to paint.'
Both staining and painting furniture always makes a huge difference.
'I immediately wiped the paint wash off with a towel to get the perfect amount of product on the piece. This technique takes some practice!'
4. Apply a topcoat
For a more uniform finish, Jarrett sanded some more areas before applying the topcoat – a water-based polyurethane. She used Varathan Clear Matte Water-Based Interior Polyurethane (opens in new tab) from The Home Depot.
'I applied a paint wash instead of a stain because I was wanting to blend the grain stripes on the piece.'
Miniwax's Clear Water-Based Protective Finish in Satin (opens in new tab) is water-based and another good option to seal wooden furniture against scratches and spills.
Jarrett's modern buffet is styled to modern farmhouse perfection. Uncomplicated with a simple rattan vase, some layered frames, greenery and tableware, of course. It's unfussy which works as the buffet honestly speaks for itself.
There's no doubt about it, the result on this antique buffet is gorgeous and will bring a lot of modern charm to a home, without a big spend.
Jarrett shared her total budget for this project:
'I believe a solid wood light finish buffet in great condition would go for $2k.' Shared Jarrett, which isn't far off! 'I spent $60 on the piece, $40 on paint stripper, $25 on carbide scraper, $10 grippers (opens in new tab), $15 sandpaper, $25 paint, and $15 on the topcoat!'
Not bad for $190.
Why not do the same on your thrifted finds to save a ton on what will feel like a totally new addition to your space? A refinished buffet would look great as a dining room addition or in a hallway.